MK Series kits include the adapter, cylinder, release bearing for stock or 7-1/4" racing clutch, attaching screws, and line adapters. Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder. For the 5-1/2" or smaller clutch, the special Tilton piston and bearing must be ordered. NOTE: This system is attached to the MK transmission with three bolts which thread into three holes encircling the main input shaft seal. If these three holes are missing in your case, a Custom annular slave cylinder system must be ordered.

INV-020078
$430.00

 MK Series kits include the adapter, cylinder, release bearing for stock or 7-1/4" racing clutch, attaching screws, and line adapters. Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder. For the 5-1/2" or smaller clutch, the special Tilton piston and bearing shown on Page 13 must be ordered. NOTE: This system is attached to the MK transmission with three bolts which thread into three holes encircling the main input shaft seal. If these three holes are missing in your case, a Custom annular slave cylinder system must be ordered.

INV-0200781
$430.00

 MK Series kits include the adapter, cylinder, release bearing for stock or 7-1/4" racing clutch, attaching screws, and line adapters. Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder. For the 5-1/2" or smaller clutch, the special Tilton piston and bearing shown on Page 13 must be ordered. NOTE: This system is attached to the MK transmission with three bolts which thread into three holes encircling the main input shaft seal. If these three holes are missing in your case, a Custom annular slave cylinder system must be ordered.

INV-0200782
$390.00

MK Series kits include the adapter, cylinder, release bearing for stock or 7-1/4" racing clutch, attaching screws, and line adapters. Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder. For the 5-1/2" or smaller clutch, the special Tilton piston and bearing shown on Page 13 must be ordered. NOTE: This system is attached to the MK transmission with three bolts which thread into three holes encircling the main input shaft seal. If these three holes are missing in your case, a Custom annular slave cylinder system must be ordered.

INV-0200783
$500.00

MK Series kits include the adapter, cylinder, release bearing for stock or 7-1/4" racing clutch, attaching screws, and line adapters. Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder. For the 5-1/2" or smaller clutch, the special Tilton piston and bearing shown on Page 13 must be ordered. NOTE: This system is attached to the MK transmission with three bolts which thread into three holes encircling the main input shaft seal. If these three holes are missing in your case, a Custom annular slave cylinder system must be ordered.

INV-0200784
$360.00

 Hydraulic release bearing kit for the Van Diemen 1999 through 2004 F2000 cars.Kit comes with all the fittings and steel braided line including a remote bleed.Tiltons newest low profile slave cylinder with only one seal is incorporated into this easy serviceable kit. PN#361-008 38mm contact bearing used with Tiltons 5.5'' clutch PN#361-031 44mm contact bearing used with Tilton/QM/AP 7.25'' clutch and 5.5'' QM and AP clutch

INV-0200786
$565.00

Hydraulic release bearing kit for the Van Diemen 1997 through 1998 F2000 cars.Kit comes with all the fittings and steel braided line including a remote bleed.Tiltons newest low profile slave cylinder with only one seal is incorporated into this easy serviceable kit. PN#361-008 38mm contact bearing used with Tiltons 5.5'' clutch PN#361-031 44mm contact bearing used with Tilton/QM/AP 7.25'' clutch and 5.5'' QM and AP clutch

INV-0200787
$565.00

A simple bearing insert will make it possible to run a Quarter Master V drive ,or AP clutch. Hydraulic release bearing kit for the Van Dieman 1999/2004 FF1600 single disc Tilton OT 2 7.25 clutch.Will also work with the F2000 twin disc 7.25 .Kit comes with all the hardware including a remote bleed line.This kit can only be used in a Formula Ford application with a Quarter Master V drive clutch if the flywheel friction surface is a stock Ford dimension of 2.025" measured from the back of the engine block.

INV-0200788
$565.00

 Slave cylinder kit for F2000 2 disc 5.5" And FF single disc 5.5 Tilton OT2 clutch

INV-0200789
$565.00

 Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder.

INV-020078C
$450.00

ANNNULAR SLAVE CYLINDER KIT CUSTOM USING TILTON SLAVE CYLINDER

INV-020078CT
$699.00

Replaces the expensive Ralt RT-4 annular slave cylinder with the modern cylinder used in RT 40/41 cars. Requires modification of input shaft housing and re-plumbing. AN-3 hose-to-cylinder adapters and release bearing for 7-1/4" racing clutch are included. These kits fit the standard RT4 and other FT-equipped cars using the 2 1/4" adapter ring and Cosworth motor with metallic clutches. Carbon clutches require a custom installation.

INV-020079
$515.00

Annular clutch release system utilizing Tilton slave cylinder. For use with Sprite/Midget transmissions with stock front cover. This system completely replaces the troublesome stock lever and carbon bearing. Specify 7.25" or 5.5" racing clutch

INV-0200791
$535.00

 W/TWO DISC CLUTCH. USES TILTON SLAVE CYLINDER

INV-0200793
$499.00

Use stiff spring for 4-speed. Use soft spring for 5-speed. Hewland Part #FT2032

INV-040030
$3.41

YOUR CART

There are no products in your shopping cart.

0 Items $0.00

ITEMS VIEWED

Nothing has been read yet.