Formula SAE

Tripod, Formula SAE Application, 20x22mm Spline, 7 oz. Weight. Note- for tripod CV joints, it is imperative that the GKN Tripod grease be used to prevent overheating.

Item #:INV-02002011
Price:$79.00

The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.5 pounds

Item #:INV-06-10006
Price:$2,800.00

The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.4pounds

Item #:INV-06-10004
Price:$2,800.00

The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.9 pounds

Item #:INV-06-10003
Price:$2,925.00

The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.1 pounds

Item #:INV-06-10002
Price:$2,750.00

The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.5 pounds

Item #:INV-06-10008
Price:$2,900.00

The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.5 pounds

Item #:INV-06-10001
Price:$2,825.00

The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.5 pounds

Item #:INV-06-10007
Price:$2,975.00

GUN DRILLED AND HONED. WEIGHT 1.16lbs. CAN BE USED FULL LENGTH 14", OR SHORTENED TO A MINUMUM OF 10" material 4130 HRC 42-47

Item #:INV-0200314
Price:$215.00

CAN BE USED FULL LENGTH 16" OR SHORTENED TO A MINIMUM OF 13.5".  MATERIAL 4130, HRC 42-47, BLACK ZINC COATED. 1.32lbs

Item #:INV-0200317
Price:$215.00

GUN DRILLED AND HONED. WEIGHT 1.47lbs. CAN BE USED FULL LENGTH 18", OR SHORTENED TO A MINUMUM OF 15.5" material 4130 HRC 42-47

Item #:INV-0200318
Price:$215.00

CAN BE USED FULL LENGTH 20" OR SHORTENED TO A MINIMUM OF 17.5", MATERIAL 4130, HRC 42-47, BLACK ZINC COATED. 1.62lbs

Item #:INV-0200320
Price:$225.00

GUN DRILLED AND HONED. WEIGHT 1.77lbs. CAN BE USED FULL LENGTH 22", OR SHORTENED TO A MINUMUM OF 17-1/8" material 4130 HRC 42-47

Item #:INV-0200319
Price:$225.00

GUN DRILLED. CAN BE USED FULL LENGTH 24", OR SHORTENED TO A MINUMUM OF 21.5" material 4130 HRC 42-47 .  1.92lbs

Item #:INV-02003191
Price:$225.00

PLUG PIVOT AXLE INBOARD FSAE/DSR FIXED INBOARD

Item #:INV-02003162
Price:$10.75

PLUNGER AXLE OUTBOARD FSAE/DSR FOR USE WITH PLUNGER SPRING

Item #:INV-02003161
Price:$11.25

SPRING PLUNGER OUTBOARD TRE FSAE/DSR AXLES

Item #:INV-02003164
Price:$3.60

ROD PLASTIC FILLER SAE/DSR HALFSHAFT SNUBBER KIT PER FOOT

Item #:INV-02003166
Price:$3.08

PLUG CUP FSAE/DSR AXLE FOR TRE/TPE CHAIN DRIVE DIFFERENTIAL

Item #:INV-02003163
Price:$12.30

Kit for rebuilding TRE MK2 FSAE differentials.  Includes instructions, seals, bolts, washers, sealant, and TRE FSAE formulated diff fluid.

Item #:INV-06-10010
Price:$47.00

TRE Aluminum differential housing for FSAE ONLY....competition. Made from 7075 T6 . it weighs in at 13 oz

Item #:INV-020005901A
Price:$342.00

SPROCKET STAR FOR COUPLING SPROCKET TO MK2 DIFF

Item #:INV-67-10002
Price:$170.00

DIFFERENTIAL BEARING MK2

Item #:INV-67-10005
Price:$80.00

CIRCLIP FOR RETAINING TRIPOD TO 30 AND 20 SPLINE HALF-SHAFT; ALSO FOR STAFFS CLUTCH SHAFT

Item #:INV-0200281
Price:$0.50

Tripod Housing, OD 86mm, Width 30mm, Bolt Circle 74mm, 14.6 oz Weight. Note: For tripod CV joints, it is imperative that the GKN Tripod grease be used to prevent overheating. CONTACT US FOR AVAILABILITY

Item #:INV-02002081
Price:$199.00

6061 T6 aluminum with Sulfamate nickel plated 50/54 Rc inserts . 86mm x 30mm on a 74mm BCD. These joint weight 211 grams and are designed for the 02002011 tripod joints. FSAE aluminum tri-pod housing , 6061 T6 aluminum with Sulfamate nickel plated 50/54 Rc inserts . 86mm x 30mm on a 74mm BCD. These joint weight 211 grams and are designed for the 02002011 tripod joints.  CALL FOR AVAILABILITY 1-800-922-GEAR

Item #:INV-02002084
Price:$207.00

Steel insert for FSAE aluminum tripod housing using the 02002011 tripod.

Item #:INV-02002085
Price:$25.99

Replaceable boot (02002074) 86mm Tri-pod housing boot. Replaces the 02002071

Item #:INV-02002071Z
Price:$49.00

Speed boot for the TRE tulip style stub axles. Can be used on the inboard as well as the outboard stub axles.Can be attached to the stub with a standard zip tie. Made from all rubber this boot weighs 1 once.

Item #:INV-02002074
Price:$25.11

BOLT KIT FOR TRIPOD HOUSING 02002081 FOR FSAE/DSR. 24- 5/16" - 24

Item #:INV-020112A
Price:$45.00

BOLT KIT FOR TRIPOD HOUSING 02002081 FOR FSAE/DSR. 12 BOLTS 5/16"-18, 12 5/16" - 24

Item #:INV-020112
Price:$48.00

Outboard Polaris tulip style stub axle for TRE drive axle.This stub has the tripod housing machined into the stub and weighs 1 pound 14.0 onces, with a max O.D of 2.5 inches.

Item #:INV-02004132
Price:$235.00

Tulip style inboard stub axle for the Torsen differential.These stubs have 5" of spline so they can be cut to fit in custom applications.These stubs are designed to be used with the small TRE tri-pod joints. These stubs weigh 2.0 pounds with all 7 of spline.Once these are cut to fit. the weight will be less.These have a max O.D of 2.5"

Item #:INV-02004181
Price:$224.48

Stub axles for chain drive racecars using the Quaife Escort differential (Quaife QDF7Z5R). They allow the 86mm lightweight tripod joint(PN 02002081) or lightweight Lobro CV joint (PN 02002013) to be used.

Item #:INV-0200416
Price:$271.63

AXLE STUB OUTBOARD 4-BOLT WHEEL ATTACH 86MM FIAT SPLINED STUB

Item #:INV-0200415
Price:$261.38

Stub axle for use with Taylor Race Engineering lightweight 86mm tripod housings (PN 02002081) or 86mm Lobro joints(PN 02002013). For use with standard VW type wheel bearing (PN WB643437) and wheel mounting flange (PN ZPT300-321S).

Item #:INV-0200414
Price:$270.60

Stub axle for use with Taylor Race Engineering lightweight 86mm tripod housings (PN 02002081) or 86mm Lobro joints(PN 02002013). For use with standard VW type wheel bearing (PN WB643437) and wheel mounting flange (PN ZPT300-321S).

Item #:INV-0200413
Price:$251.00

86 mm Tripod inboard stub axle.Splined for the Civic based chain drive differential.4340 Rc48/50

Item #:INV-0200420
Price:$200.90

86 mm Tripod stub axle for the Torsen University spec differential.7' splines so this stub can be machined to fit your application.

CALL FOR AVAILABILITY

Item #:INV-0200418
Price:$266.50

Wheel flange hub for FSAE cars, Uses  bearing number INV-WB643437

CONTACT US FOR AVAILABILITY

Item #:INV-0200422
Price:$260.00

WHEEL BEARING 50mm ID 30mm OD 20mm W, .28lbs

18kN dynamic load, 12kN static load, 32mm load center

Item #:INV-WB503020
Price:$40.52

WHEEL BEARING 25mm ID 52mm OD 20.6mm W, .38lbs

22Kn dynamic load, 15kN static load, 30mm load center

Item #:INV-WB522520
Price:$34.25

WHEEL BEARING 53mmOD 29mmID 37mmW, 0.65LBS

26kN dynamic load, 18kN static load, 48mm load center 

Item #:INV-WB532937
Price:$37.70

These bearings will fit most common size uprights using double row cassette bearings, such as Swift, Ralt, and Van Diemen. Order by dimensions.

.94lbs, 32kN dynamic load, 24kN static load, 49mm load center

Item #:INV-WB603037
Price:$73.85

WHEEL BEARING 62mm OD 30mm ID 23mm W, .62lbs

30.5kN dynamic load, 22kN static load, 36mm load center

Item #:INV-WB623023
Price:$41.60

Upright wheel bearing 64mm OD 34mm ID 37mmW, 1.03lbs, 

35kN dynamic load, 27kN static load, 50mm load center

Item #:INV-WB643437
Price:$47.15

WHEEL BEARING 66MM X 35MM X 37MM (SWIFT DB5/6 REAR, PHOENIX DSR, STOHR DSR), 1.12lbs

36kN dynamic load, 28kN static load, 51mm load center

Item #:INV-WB663537
Price:$76.00

WHEEL BEARING 68mm OD 39mm ID 37mm W, 1.04lbs

36kN dynamic load, 30kN static load, 52mm load center

Item #:INV-WB683937
Price:$55.65

WHEEL BEARING 72mm OD 40mm ID 37mm W, 1.18lbs

38kN dynamic load, 32kN static load, 53mm load center

Item #:INV-WB724037
Price:$51.30

WHEEL BEARING 72mm OD 35mm ID 27mm W, .92lbs

40.5kN dynamic load, 30kN static load, 42mm load center

Item #:INV-WB723527
Price:$43.80

WHEEL BEARING 72MM OD 44MM ID 33MM W, .98lbs

36kN dynamic load, 30kN static load, 50mm load center

Item #:INV-WB724433
Price:$45.80