Taylor Race

ANNULAR SLAVE CYLINDER KIT FOR FORMULA FORD 16OO USING 7.25" RACING CLUTCH (TILTON, AP OR QUARTERMASTER)

 MK Series kits include the adapter, cylinder, release bearing for stock or 7-1/4" racing clutch, attaching screws, and line adapters. Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder. For the 5-1/2" or smaller clutch, the special Tilton piston and bearing shown on Page 13 must be ordered. NOTE: This system is attached to the MK transmission with three bolts which thread into three holes encircling the main input shaft seal. If these three holes are missing in your case, a Custom annular slave cylinder system must be ordered.

Item #: INV-0200781
Price: $430.00
ANNULAR SLAVE CYLINDER KIT FOR RALT RT5 SUPER VEE USING 7.25" RACING CLUTCH (TILTON, AP OR QUARTERMASTER)

 MK Series kits include the adapter, cylinder, release bearing for stock or 7-1/4" racing clutch, attaching screws, and line adapters. Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder. For the 5-1/2" or smaller clutch, the special Tilton piston and bearing shown on Page 13 must be ordered. NOTE: This system is attached to the MK transmission with three bolts which thread into three holes encircling the main input shaft seal. If these three holes are missing in your case, a Custom annular slave cylinder system must be ordered.

Item #: INV-0200782
Price: $390.00
ANNULAR SLAVE CYLINDER KIT FOR LOTUS CARS USING 3 3/8" BELL HOUSING AND OEM FORD CLUTCH

MK Series kits include the adapter, cylinder, release bearing for stock or 7-1/4" racing clutch, attaching screws, and line adapters. Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder. For the 5-1/2" or smaller clutch, the special Tilton piston and bearing shown on Page 13 must be ordered. NOTE: This system is attached to the MK transmission with three bolts which thread into three holes encircling the main input shaft seal. If these three holes are missing in your case, a Custom annular slave cylinder system must be ordered.

Item #: INV-0200783
Price: $500.00
ANNULAR SLAVE CYLINDER KIT FOR LOTUS CARS USING 3 3/8" BELL HOUSING AND 7.25" RACING CLUTCH (TILTON, AP OR QUARTERMASTER)

MK Series kits include the adapter, cylinder, release bearing for stock or 7-1/4" racing clutch, attaching screws, and line adapters. Hose ends and remote bleed kit must be ordered separately. Size of pressure line (-3 or -4) must be specified so that we can install the correct fitting in the cylinder. For the 5-1/2" or smaller clutch, the special Tilton piston and bearing shown on Page 13 must be ordered. NOTE: This system is attached to the MK transmission with three bolts which thread into three holes encircling the main input shaft seal. If these three holes are missing in your case, a Custom annular slave cylinder system must be ordered.

Item #: INV-0200784
Price: $360.00
1999/2004 Van Diemen hydraulic release bearing kit from TRE

 Hydraulic release bearing kit for the Van Diemen 1999 through 2004 F2000 cars.Kit comes with all the fittings and steel braided line including a remote bleed.Tiltons newest low profile slave cylinder with only one seal is incorporated into this easy serviceable kit. PN#361-008 38mm contact bearing used with Tiltons 5.5'' clutch PN#361-031 44mm contact bearing used with Tilton/QM/AP 7.25'' clutch and 5.5'' QM and AP clutch

Item #: INV-0200786
Price: $565.00
1997/1998 Van Diemen hydraulic release bearing kit from TRE

Hydraulic release bearing kit for the Van Diemen 1997 through 1998 F2000 cars.Kit comes with all the fittings and steel braided line including a remote bleed.Tiltons newest low profile slave cylinder with only one seal is incorporated into this easy serviceable kit. PN#361-008 38mm contact bearing used with Tiltons 5.5'' clutch PN#361-031 44mm contact bearing used with Tilton/QM/AP 7.25'' clutch and 5.5'' QM and AP clutch

Item #: INV-0200787
Price: $565.00
The 0200788 hydraulic release bearing can be used on all 7.25 clutch applications.

A simple bearing insert will make it possible to run a Quarter Master V drive ,or AP clutch. Hydraulic release bearing kit for the Van Dieman 1999/2004 FF1600 single disc Tilton OT 2 7.25 clutch.Will also work with the F2000 twin disc 7.25 .Kit comes with all the hardware including a remote bleed line.This kit can only be used in a Formula Ford application with a Quarter Master V drive clutch if the flywheel friction surface is a stock Ford dimension of 2.025" measured from the back of the engine block.

Item #: INV-0200788
Price: $565.00

ANNNULAR SLAVE CYLINDER KIT CUSTOM USING TILTON SLAVE CYLINDER

Item #: INV-020078CT
Price: $699.00
ANNULAR SLAVE CYLINDER KIT FOR RALT RT4 WITH 2-DISC RACING CLUTCH (TILTON, AP OR QUARTERMASTER)

Replaces the expensive Ralt RT-4 annular slave cylinder with the modern cylinder used in RT 40/41 cars. Requires modification of input shaft housing and re-plumbing. AN-3 hose-to-cylinder adapters and release bearing for 7-1/4" racing clutch are included. These kits fit the standard RT4 and other FT-equipped cars using the 2 1/4" adapter ring and Cosworth motor with metallic clutches. Carbon clutches require a custom installation.

Item #: INV-020079
Price: $515.00
ANNULAR SLAVE CYLINDER KIT SPRITE AND MIDGET WITH STOCK FRONT COVER

Annular clutch release system utilizing Tilton slave cylinder. For use with Sprite/Midget transmissions with stock front cover. This system completely replaces the troublesome stock lever and carbon bearing. Specify 7.25" or 5.5" racing clutch

Item #: INV-0200791
Price: $535.00

SPACING SHIM .032"

Item #: INV-040310
Price: $0.21

SPACING SHIM .010"

Item #: INV-040320
Price: $2.05

SPACING SHIM .005"

Item #: INV-040321
Price: $2.05

SPACING SHIM .015"

Item #: INV-040322
Price: $2.05

STOP SHIM, .005"

Item #: INV-040325
Price: $2.05

STOP SHIM, 010"

Item #: INV-040326
Price: $2.05

STOP SHIM, .015"

Item #: INV-040327
Price: $2.50

PINION NUT WEBSTER 7/8-20; 1-5/16 ACROSS FLATS

Item #: INV-040350
Price: $52.96

DRAWBOLT MK

Item #: INV-040390
Price: $95.86

MK HUB SETUP SHIM .020

Item #: INV-040424
Price: $2.31