TRE Aluminum differential housing for FSAE ONLY....competition. Made from 7075 T6 . it weighs in at 13 oz
Item #:
INV-020005901A
Price:
$342.00
Speak to a rep 800.922.4327
Formula SAE
Retaining ring for drive flanges INV-02000594
Item #:
INV-020005941
Price:
$3.00
TRE Silicon Blend for chain drive diff. Specify low, medium, or high viscosity.
Item #:
INV-0200069
Price:
$18.95
Tripod, Formula SAE Application, 20x22mm Spline, 7 oz. Weight. Note- for tripod CV joints, it is imperative that the GKN Tripod grease be used to prevent overheating.
Item #:
INV-02002011
Price:
$79.00
Replaceable boot (02002074) 86mm Tri-pod housing boot. Replaces the 02002071
Item #:
INV-02002071Z
Price:
$49.00
Speed boot for the TRE tulip style stub axles. Can be used on the inboard as well as the outboard stub axles.Can be attached to the stub with a standard zip tie. Made from all rubber this boot weighs 1 once.
Item #:
INV-02002074
Price:
$25.11
Tripod Housing, OD 86mm, Width 30mm, Bolt Circle 74mm, 14.6 oz Weight. Note: For tripod CV joints, it is imperative that the GKN Tripod grease be used to prevent overheating. CONTACT US FOR AVAILABILITY
Item #:
INV-02002081
Price:
$199.00
6061 T6 aluminum with Sulfamate nickel plated 50/54 Rc inserts . 86mm x 30mm on a 74mm BCD. These joint weight 211 grams and are designed for the 02002011 tripod joints. FSAE aluminum tri-pod housing , 6061 T6 aluminum with Sulfamate nickel plated 50/54 Rc inserts . 86mm x 30mm on a 74mm BCD. These joint weight 211 grams and are designed for the 02002011 tripod joints. IN STOCK
Item #:
INV-02002084
Price:
$207.00
Steel insert for FSAE aluminum tripod housing using the 02002011 tripod.
Item #:
INV-02002085
Price:
$25.99
Steel insert for FSAE aluminum tripod housing using the 02002011 tripod. Length 1.8"
Item #:
INV-02002086
Price:
$25.99
CIRCLIP FOR RETAINING TRIPOD TO 30 AND 20 SPLINE HALF-SHAFT; ALSO FOR STAFFS CLUTCH SHAFT
Item #:
INV-0200281
Price:
$0.50
GUN DRILLED AND HONED. WEIGHT 1.16lbs. CAN BE USED FULL LENGTH 14", OR SHORTENED TO A MINUMUM OF 10" material 4130 HRC 42-47
Item #:
INV-0200314
Price:
$215.00
PLUNGER AXLE OUTBOARD FSAE/DSR FOR USE WITH PLUNGER SPRING
Item #:
INV-02003161
Price:
$11.25
PLUG PIVOT AXLE INBOARD FSAE/DSR FIXED INBOARD
Item #:
INV-02003162
Price:
$10.75
PLUG CUP FSAE/DSR AXLE FOR TRE/TPE CHAIN DRIVE DIFFERENTIAL
Item #:
INV-02003163
Price:
$12.30
SPRING PLUNGER OUTBOARD TRE FSAE/DSR AXLES
Item #:
INV-02003164
Price:
$3.60
ROD PLASTIC FILLER SAE/DSR HALFSHAFT SNUBBER KIT PER FOOT
Item #:
INV-02003166
Price:
$3.08
CAN BE USED FULL LENGTH 16" OR SHORTENED TO A MINIMUM OF 13.5". MATERIAL 4130, HRC 42-47, BLACK ZINC COATED. 1.32lbs
Item #:
INV-0200317
Price:
$215.00
GUN DRILLED AND HONED. WEIGHT 1.47lbs. CAN BE USED FULL LENGTH 18", OR SHORTENED TO A MINUMUM OF 15.5" material 4130 HRC 42-47
Item #:
INV-0200318
Price:
$215.00
GUN DRILLED AND HONED. WEIGHT 1.77lbs. CAN BE USED FULL LENGTH 22", OR SHORTENED TO A MINUMUM OF 19-1/2" material 4130 HRC 42-47
Item #:
INV-0200319
Price:
$225.00
GUN DRILLED. CAN BE USED FULL LENGTH 24", OR SHORTENED TO A MINUMUM OF 21.5" material 4130 HRC 42-47 . 1.92lbs
Item #:
INV-02003191
Price:
$225.00
GUN DRILLED AND HONED, WEIGHT ~2LBS.
MATERIAL 4130 HRC 42-47.
CALL FOR AVAILABILITY. SPECIAL ORDER.
Item #:
INV-020031911
Price:
$225.00
CAN BE USED FULL LENGTH 20" OR SHORTENED TO A MINIMUM OF 17.5", MATERIAL 4130, HRC 42-47, BLACK ZINC COATED. 1.62lbs.
CONTACT FOR AVAILABILITY
Item #:
INV-0200320
Price:
$225.00
Stub axle for use with Taylor Race Engineering lightweight 86mm tripod housings (PN 02002081) or 86mm Lobro joints(PN 02002013). For use with standard VW type wheel bearing (PN WB643437) and wheel mounting flange (PN ZPT300-321S).
Item #:
INV-0200413
Price:
$251.00
Outboard Polaris tulip style stub axle for TRE drive axle.This stub has the tripod housing machined into the stub and weighs 1 pound 14.0 onces, with a max O.D of 2.5 inches.
Item #:
INV-02004132
Price:
$235.00
Stub axle for use with Taylor Race Engineering lightweight 86mm tripod housings (PN 02002081) or 86mm Lobro joints(PN 02002013). For use with standard VW type wheel bearing (PN WB643437) and wheel mounting flange (PN ZPT300-321S).
Item #:
INV-0200414
Price:
$270.60
AXLE STUB OUTBOARD 4-BOLT WHEEL ATTACH 86MM FIAT SPLINED STUB
Item #:
INV-0200415
Price:
$261.38
Stub axles for chain drive racecars using the Quaife Escort differential (Quaife QDF7Z5R). They allow the 86mm lightweight tripod joint(PN 02002081) or lightweight Lobro CV joint (PN 02002013) to be used.
Item #:
INV-0200416
Price:
$271.63
86 mm Tripod stub axle for the Torsen University spec differential.7' splines so this stub can be machined to fit your application.
CALL FOR AVAILABILITY
Item #:
INV-0200418
Price:
$266.50
Tulip style inboard stub axle for the Torsen differential.These stubs have 5" of spline so they can be cut to fit in custom applications.These stubs are designed to be used with the small TRE tri-pod joints. These stubs weigh 2.0 pounds with all 7 of spline.Once these are cut to fit. the weight will be less.These have a max O.D of 2.5"
Item #:
INV-02004181
Price:
$224.48
86 mm Tripod inboard stub axle.Splined for the Civic based chain drive differential.4340 Rc48/50
Item #:
INV-0200420
Price:
$200.90
Wheel flange hub for FSAE cars, Uses bearing number INV-WB643437
CONTACT US FOR AVAILABILITY
Item #:
INV-0200422
Price:
$260.00
BOLT KIT FOR TRIPOD HOUSING 02002081 FOR FSAE/DSR. 12 BOLTS 5/16"-18, 12 5/16" - 24
Item #:
INV-020112
Price:
$48.00
BOLT KIT FOR TRIPOD HOUSING 02002081 FOR FSAE/DSR. 24- 5/16" - 24
Item #:
INV-020112A
Price:
$45.00
The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.5 pounds
Item #:
INV-06-10001
Price:
$2,825.00
The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.1 pounds
Item #:
INV-06-10002
Price:
$2,750.00
The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.9 pounds
Item #:
INV-06-10003
Price:
$2,925.00
The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.4pounds
Item #:
INV-06-10004
Price:
$2,800.00
The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.5 pounds
Item #:
INV-06-10006
Price:
$2,800.00
The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.5 pounds
Item #:
INV-06-10007
Price:
$2,975.00
The new TRE chain drive diff designed for the FSAE world.Complete diff with bearings and tulip stubs weighs 8.5 pounds
Item #:
INV-06-10008
Price:
$2,900.00
Kit for rebuilding TRE MK2 FSAE differentials. Includes instructions, seals, bolts, washers, sealant, and TRE FSAE formulated diff fluid.
Item #:
INV-06-10010
Price:
$47.00
SPROCKET STAR FOR COUPLING SPROCKET TO MK2 DIFF
Item #:
INV-67-10002
Price:
$170.00
WHEEL BEARING 50mm ID 30mm OD 20mm W, .28lbs
18kN dynamic load, 12kN static load, 32mm load center
Item #:
INV-WB503020
Price:
$40.52
WHEEL BEARING 25mm ID 52mm OD 20.6mm W, .38lbs
22Kn dynamic load, 15kN static load, 30mm load center
Item #:
INV-WB522520
Price:
$34.25